Yamaha YSP-1100 - Manual (Page 14)

CONTROLS AND FUNCTIONS
® TV POWER
Turns on the power of the TV or sets it to the standby
mode (see page 82).
® AV POWER
Turns on the power of the selected component or sets it to
the standby mode (see pages 82 and 83).
@ INPUT1/INPUT2
Selects the input source of the TV (see page 82).
(g) MACRO
Use to set the TV macro (see page 84).
® SLEEP
Sets the sleep timer (see page 58).
@ INPUTMODE
Switches between input modes (AUTO, DTS or
ANALOG). See page 75 for details.
(g) Beam mode buttons
Change the beam mode settings (see pages 42, 47 and 48).
@ SURROUND
Selects the surround mode for playback (see page 42).
(g) MY BEAM
Use to select the my beam as the beam mode (see
page 48).
@ TruBass
Use to effectively reproduce the bass sound (see page 57).
@) MENU
Displays the setup menu on your TV monitor (see
pages 31 and 61).
Display the DVD menu. (@):TV/AV)
(g Operation mode selector
Selects the operation mode of this unit. Select YSP when
operating this unit and select TV/AV when operating the
TV or other AV components set up the appropriate remote
control codes.
@ RETURN
Use to select sleep timer settings or return to the previous
SET MENU screen.
Use to return to the previous DVD menu screen or exit the
DVD menu. (g;TV/AV)
(g) TVVOL+/-
Adjusts the volume level of the TV (see page 82).
® CH+/-
Switches between channels of the TV or the VCR (see
pages 82 and 83).
® TV MUTE, CODE SET
Mutes the audio output of the TV (see page 82).
Use to set up remote control codes (see page 81).
10 En