Using the audio output being piayerback, Using the audio output being player back – Yamaha YSP-1100 User Manual

Page 77

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

ADJUSTING THE AUDIO BALANCE

5

Press TEST when you have completed all

your adjustments.

Notes

• All the channel levels cannot be adjusted when the stereo

playback or my beam is selected as the beam mode (see
pages 47 and 48).

• FRONT L/R cannot be adjusted when the stereo plus 3 beam is

selected as the beam mode (see page 43).

• FRONT L/R are automatically adjusted depending on the

settings of the other channels when the stereo plus 3 beam or
stereo playback is selected as the beam mode (see pages 43 and

47).

If the level of a particular channel cannot be adjusted, —dB
appears in the front panel display.

Using the audio output being

piayerback

You can also manually adjust the channel levels while
playing back an input source such as a DVD.

U

1

Set the operation mode selector to YSP to

switch to the operation mode of this unit.

TV/A^_

h

2

Press CH LEVEL repeatedly (or press

CH LEVEL and then ^ to select the

channel you want to adjust.

The front panel display changes as follows.

■FRONT L +l,0dB

t

CENTER -2.5dB

1

FRONT R +1.0dB

i

SUR. R. +2.0dB

i

SUR. L

+2.

0dB

■SljJFR —dB

73

En

Advertising