Using manual setup, 2 press menu on the remote control, 5 press ^ / <1 /1> and enter to configure – Yamaha YSP-1100 User Manual

Page 65: Each parameter, 6 press menu to exit

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

MANUAL SETUP

Using MANUAL SETUP

Use the remote control to access and adjust each
parameter.

u

You can adjust the SET MENU parameters while the unit is
reproducing sound.

1

Set the operation mode selector to YSP to

switch to the operation mode of this unit.

Press ^ / N7 to select MANUAL SETUP and

then press ENTER.

The following screen appears on your TV.

4 1)SOUND MENU

2) BEAM MENU
3) INPUT MENU

4>DISPLflV MENU

[jh.]/[T] :Up--'Down

CENTER]:Enter

4

Press

^ to

select a sub menu and then

press ENTER.

2

Press MENU on the remote control.

The SET MENU screen appears on your TV.

il IfilJ

4 -MEMORV

■AUTO SETUP

■MANUAL SETUP

■LANGUAGE SETUP

[A]/[T]:Up/Doun
CENTER]:Enter

5

Press ^

/ <1 /1> and ENTER to configure

each parameter.

• The control buttons used for SET MENU are displayed on

the bottom of the screen.

• To return to the previous screen while using SET MENU,

press RETURN on the remote control.

• To cancel the SET MENU screen, press MENU once

more.

• You can also perform the following operations in the front

panel display.

6

Press MENU to exit.

The OSD disappears from your TV screen.

61

En

Advertising