Yamaha YSP-1100 - Manual (Page 104)

Enjoy TV or DVD audio in surround sound.
For instructions on your TV or DVD player, refer to the owner’s manual supplied with each component.
Before carrying out the procedure below, set the volume of this unit to 30. If necessary, adjust the volume level in
step 4.
Enjoying TV in surround sound Enjoying DVDs in surround sound
Select the TV channel using
the remote control supplied
with your TV.
Select the DVD video input on your
TV.
Set the operation mode selector to YSP
) i
TV/AV_
* YSP
RETURN I
Press TV on the remote
control of this unit.
This unit switches to the TV playback mode.
I
INPUT1 INPUT2 MACRO
a a
INPUTMODE SLEEP
a a
I
Press DVD on the remote control of this unit,
and then start playback on the DVD player.
This unit switches to the DVD playback mode.
I
I stb ) ¡ vcr )
_____ INPUT1 INPLI^
(13 a a
I
If you hear sound output from your TV speakers, turn down the volume level
until you cannot hear any sound.
Use the remote control supplied with your TV.
Press VOLUME +/- on the remote control to adjust
the volume level of this unit.
Press one of the beam mode buttons on the
remote control to select the desired beam mode.
Select one of the three beam modes that best matches the current input source of
this unit.
For further information on the beam modes, see page 42 in the Owner’s Manual.
5BEAM ST+3BEAM 38EAM
(IDGDI j D,
STEREO MY BEAM SURROUND)
MUSIC MOVIE SPORTS
To fine-tune the listening environment parameters manually or make advanced settings for
speaker positions, sound beams, etc., see “MANUAL SETUP” on page 60 in the Owner’s Manual.