Yamaha YSP-1100 - Manual (Page 71)

MANUAL SETUP
SUBWOOFER SET (Subwoofer set)
Use to manually adjust various subwoofer settings.
HjjUByUuFhii bhi
BASS OUT.......FRONT
CROSS OUER-■.100Hz
LFE LEUEL........ 0dB
DISTANCE........ 3.0n
[J l ]/C t ] : Llp/Doi.iri [->i3/[N-] s Sel
CENTER]:Return
BASS OUT (Bass out)
Low-frequency (bass) signals can be directed to the
subwoofer and/or the front left and right channels. This
setting also determines the routing of LFE (low-frequency
effect) signals found in Dolby Digital or DTS sources.
Choices: SWFR (subwoofer),
FRONT
• Select SWFR if you connect a subwoofer. LFE and
low-frequency signals from other channels are directed
to the subwoofer.
• Select FRONT if you do not use a subwoofer. LFE and
low-frequency signals from other channels are directed
to the front left and right channels.
CROSS OVER (Cross over)
When BASS OUT is set to SWFR, you can use this
feature to select a cross-over (cut-off) frequency for all
low-frequency signals. All frequencies below the selected
frequency will be sent to the subwoofer speaker position.
Choices: 80Hz,
100Hz, 120Hz
LFE LEVEL (Low-frequency effect level)
Select to adjust the output level of the LFE (low-frequency
effect) channel according to the capacity of your
subwoofer. The LFE channel carries low-frequency
special effects which are only added to certain scenes.
This setting is effective only when this unit decodes Dolby
Digital or DTS signals.
Choices: -20 to 0 dB
DISTANCE (Distance)
Select to adjust the distance of the subwoofer from the
listening position.
Choices: 0.3 to 15.0 m
Initial setting: 3.0 m
■ MUTE LEVEL (Muting level)
Use to adjust how much the mute function reduces the
volume level.
Choices:
MUTE, -20 dB
• Select MUTE to completely halt all sound output.
• Select -20 dB to reduce the current volume level by
20 dB.
OIIJTE LEJEL
►MUTE -20dB
[^]/[l»-]: Select
CENTER]:Return
■ AUDIO DELAY (Audio delay)
Use to delay the sound output and synchronize it with the
video image. This may be necessary when using certain
LCD monitors or projectors.
Choices:
0 to 160 msec
[DfllWO M'l
AUDIO DELAV....... Bnsec
C^]/[l»-]: Select
CENTER]:Return
■ ROOM EQ (Room equalizer)
Use to change the tonal qualities of your listening room
when the unit is mounted on the wall.
Choices: MOUNTING (Mount type),
REFLECTING (Reflectivity type)
E)i?0rjl1 E0
• MOUNTING...... SHELF
REFLECTING-■-NORMAL
MOUNTING (Mount type)
Use to enhance medium to low range sounds.
Choices: WALL (Wall mount),
SHELF (Shelf mount)
• Select WALL if this unit is mounted on the wall in your
listening room.
• Select SHELF if this unit is mounted on the shelf in
your listening room.
REFLECTING (Reflectivity type)
Use to select the reflectivity of your listening room.
Choices:
NORMAL (Normal), HI ECHO (High echo)
• Select NORMAL if your listening room has a normal
reflectivity.
• Select HI ECHO if your listening room has highly
reflective surfaces such as concrete walls.
67
En