Yamaha HTR-6090 - Manual (Page 102)

98
En
CUSTOMIZING THIS UNIT (MANUAL SETUP)
■ Memory guard
B)MEMORY GUARD
Use this feature to prevent accidental changes to DSP
program parameter values and other system settings.
Choices: OFF, ON
• Select “OFF” to turn off the “MEMORY GUARD”
feature.
• Select “ON” to protect:
– DSP sound field program parameters
– all “SET MENU” items
– all speaker levels
When “MEMORY GUARD” is set to “ON”, you cannot select
and adjust any other “SET MENU” items.
■ Audio select
C)AUDIO SELECT
Use this feature to designate the default input mode for the
input sources connected to the DIGITAL INPUT jacks
when you turn on the power of this unit.
Choices: AUTO, LAST
• Select “AUTO” if you want this unit to automatically
detect the type of input signals and select the
appropriate input mode.
• Select “LAST” if you want this unit to automatically
select the last input mode used for the connected input
source.
Selecting “LAST” does not recall the last setting for the EXTD
SUR. button on the remote control.
■ Decoder mode
D)DECODER MODE
Use this feature to designate the default decoder mode for
the input sources connected to the DIGITAL INPUT jacks
when you turn on the power of this unit.
Choices: AUTO, LAST
• Select “AUTO” to if you want this unit to
automatically detect the type of input signals and select
the appropriate decoder mode.
• Select “LAST” to if you want this unit to automatically
select the last decoder mode used the connected input
source.
Selecting “LAST” does not recall the last setting for the EXTD
SUR. button on the remote control.
■ Parameter initialization
E)PARAM.INI
Use this feature to initialize the parameters of each sound
field program within a sound field program group. When
you initialize a sound field program group, all of the
parameter values within that group revert to their initial
factory settings.
Press the corresponding sound field program selector
buttons on the remote control to select the sound
field
program that you want to initialize.
An asterisk (*) appears to the left of the sound field
program names that have been changed from their initial
factory settings.
Choices: CLASSICAL, LIVE/CLUB,
ENTERTAINMENT, MOVIE, STEREO,
SURROUND DECODE
• You cannot automatically revert to the previous parameter
settings once you initialize a sound field program group.
• You cannot separately initialize individual sound field
programs.
• You cannot initialize any sound field program groups when
“MEMORY GUARD” is set to “ON” (see page 98).
Note
Note
OFF ON
[ ]/[ ]:Adjust
B)MEMORY GUARD
p
[
[
[AUTO LAST
C)AUDIO SELECT
[ p]/[[]:Adjust
Note
Notes
[AUTO LAST
D)DECODER MODE
[ p]/[[]:Adjust
CLASSICAL
*LIVE/CLUB
ENTERTAINMENT
*MOVIE
STEREO
SURROUND DECODE
Press DSP key
E)PARAM. INI
01EN_00_HTR-6090_U.book Page 98 Tuesday, June 27, 2006 6:40 PM