Yamaha HTR-6090 - Manual (Page 92)

88
En
CUSTOMIZING THIS UNIT (MANUAL SETUP)
Surround back speakers SB L/R SP
Choices: NONE, SMLx1, SMLx2, LRGx1, LRGx2
• Select “NONE” (none) if you did not connect surround
back speakers. The surround back channel signals are
directed to the surround left and right speakers.
• Select “SMLx1” (small x 1) if you have a small
surround back speaker that does not reproduce low-
frequency signals effectively. The low-frequency
signals of the surround back left and right channels are
directed to the speakers selected in “LFE/BASS OUT”
and the rest of the signals are directed to the surround
back left speaker.
• Select “SMLx2” (small x 2) if you have two small
surround back speakers that do not reproduce low-
frequency signals effectively. The low-frequency
signals of the surround back left and right channels are
directed to the speakers selected in “LFE/BASS OUT”.
• Select “LRGx1” (large x 1) if you have a large
surround back speaker that reproduces low-frequency
signals effectively. All the surround back left and right
channel signals are directed to the surround back left
speaker.
• Select “LRGx2” (large x 2) if you have two large
surround back speakers that reproduce low-frequency
signals effectively. All the surround back left and right
channel signals are directed to the surround back left
and right speakers.
Presence speakers PRESENCE SP
Use this feature if you want to use the presence speakers
connected to this unit.
Choices: NONE, YES
• Select “NONE” (none) if you did not connect presence
speakers.
• Select “YES” (yes) if you connected presence speakers
and want to use them.
Bass cross over CROSS OVER
Use this feature to select the crossover frequency of all the
speakers set to “SML” (or “SMALL”) or to “NONE” in
“SPEAKER SET” (see pages 86 and 88). All frequencies
below the selected frequency will be sent to the subwoofer
or to the speakers set to “LRG” (or “LARGE”) in
“SPEAKER SET” (see pages 86 and 88).
Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz,
120Hz, 160Hz, 200Hz
Subwoofer phase SUBWOOFER PHASE
Use this feature to switch the phase of your subwoofer if
bass sounds are lacking or unclear.
Choices: NORMAL, REVERSE
• Select “NORMAL” if you do not want to reverse the
phase of your subwoofer.
• Select “REVERSE” to reverse the phase of your
subwoofer.
Presence/Surround back channel priority
PRIORITY
Use this feature to prioritize either the presence or the
surround back speakers when playing sources that contain
surround back channel signals using the CINEMA DSP
sound field programs.
Choices: PRNS, SB
• Select “PRNS” to use the presence speakers even when
surround back channel signals are input. The signals
for the surround back channel will be output from the
surround speakers.
• Select “SB” to use the surround back speakers when
surround back channel signals are detected in a
CINEMA DSP program. The presence channel signals
are output from the front speakers.
SMLx1 SMLx2
SB L/R SP
[
NONE YES
PRESENCE SP
[
FREQ ;;;80Hz
CROSS OVER
NORMAL REVERSE
02A SUBWOOFER PHASE
[
PRNS SB
PRIORITY
[
01EN_00_HTR-6090_U.book Page 88 Tuesday, June 27, 2006 6:40 PM