Washing programmes – Zanussi ZWS 5883 User Manual

Page 9

Advertising
background image

Ink: depending on the type of ink, moisten the
fabric first with acetone

1)

, then with acetic acid;

treat any residual marks on white fabrics with
bleach and then rinse thoroughly.
Tar stains: first treat with stain remover, methy-
lated spirits or benzine, then rub with detergent
paste.

Detergents and additives

Good washing results also depend on the choice
of detergent and use of the correct quantities to
avoid waste and protect the environment.
Although biodegradable, detergents contain
substances which, in large quantities, can upset
the delicate balance of nature.
The choice of detergent will depend on the type
of fabric (delicates, woollens, cottons, etc.), the
colour, washing temperature and degree of soil-
ing.
All commonly available washing machine deter-
gents may be used in this appliance:
• powder detergents for all types of fabric
• powder detergents for delicate fabrics (60°C

max) and woollens

• liquid detergents, preferably for low temper-

ature wash programmes (60°C max) for all
types of fabric, or special for woollens only.

The detergent and any additives must be placed
in the appropriate compartments of the dispens-
er drawer before starting the wash programme.
If using liquid detergents, a programme without
prewash must be selected.

Your appliance incorporates a recirculation sys-
tem which allows an optimal use of the concen-
trated detergent.
Follow the product manufacturer’s recommen-
dations on quantities to use and do not exceed
the «MAX» mark in the detergent dispenser draw-
er .

Quantity of detergent to be used

The type and quantity of detergent will depend
on the type of fabric, load size, degree of soiling
and hardness of the water used.
Follow the product manufacturers’ instructions
on quantities to use.
Use less detergent if:
• you are washing a small load
• the laundry is lightly soiled
• large amounts of foam form during washing.

Degrees of water hardness

Water hardness is classified in so-called “degrees”
of hardness. Information on hardness of the wa-
ter in your area can be obtained from the relevant
water supply company, or from your local au-
thority. If the water hardness degree is medium
or high we suggest you to add a water softener
following always the manufacturer’s instructions.
When the degree of hardness is soft, readjust the
quantity of the detergent.

Washing Programmes

9

Advertising