Xerox FaxCentre 2218 - Manual (Page 150)

Page 8-4 Xerox FaxCentre 2218 User Guide
Machine Administration
ControlCentre
ControlCentre is software available for the FaxCentre 2218 which enables Fax and Print
options and features to be setup and viewed remotely using a PC. This tool also enables
firmware upgrades.
After setting up Fax options, creating phonebooks or setting Print options simply click [Apply]
on the ControlCentre screen to download the new settings to the machine.
Installing ControlCentre
When FaxCentre 2218 software is installed the ControlCentre utility is installed automatically.
)
For information on installing refer to “Maintenance Tools” on page 8-16.
Running ControlCentre
Use the following instructions to run ControlCentre:
¾ Start the Windows software.
¾ From Programs select [FaxCentre 2218], then [ControlCentre].
The ControlCentre screen displays.
Using ControlCentre
The ControlCentre software provides three tabs:
- Phonebook
- Firmware Update
- Printer
To exit ControlCentre, click the [Exit] key in the bottom of each tab screen.
For further details, click the [Help] key in the bottom of each tab screen.
)
When the settings on ControlCentre are changed, or when ControlCentre is run, the
settings on the machine and on ControlCentre will be automatically updated to the
latest settings made either on the machine or on ControlCentre.
1
12
01_UG.book Page 4 Wednesday, March 7, 2007 3:00 PM