Mix bread – Zojirushi BBCC-Q20 User Manual

Page 7

Advertising
background image

4. Insert the baking pan into the machine. Turn the

baking pan to the "LOCK" position aligning the

mark ( ) on the main body with the ( ) mark on

the baking pan so that it locks in place. Pull the

handle lightly to make sure that the baking pan

is secure, then fold the handle down.

MIX BREAD

- 7 -

Let's Start Baking!

Mix Bread

1. Open the lid and turn the baking pan to the

"UNLOCK" direction. Then remove the baking

pan by pulling up on the handle.

2. Attach the kneading blade to the rotating shaft;

push down firmly.

5. Close the lid, and plug in the unit. 3:50 will

start blinking.

7. Press the START key. The red operation light

will illuminate. The entire cycle will take 3

hours and 50 minutes.

Kneading will start after 15 minutes of

preheating.

8. When the cycle has completed, beeps will

sound and operation light will flash. Press the

RESET key, open the lid. Hold the handle with

an oven mitten and turn the baking pan to the

UNLOCK position, remove the baking pan by

pulling up on the handle. If the RESET key is

not pressed after the beeps have sounded, the

machine will continue to heat for 60 minutes.

The bread should be removed as soon as

possible.

Avoid placing the heated baking pan on the

main body or on any carpet, etc. susceptible to

heat, as it may cause damage to the main body

or carpet.

9. Gently shake the bread

loaf out of the baking

pan and onto a cooling

rack. Take out with

much care not to get

burnt. Turn the bread

right side up to cool.

Allow to cool before

slicing. If the kneading

blade is stuck to the

bottom of the loaf,

remove it using a

rubber spatula since it

will be hot.

10. After use, unplug the unit.

6. Starting

(1) Press the SELECT COURSE key and select

the MIX BREAD setting. When the SELECT

COURSE key is pressed, the display will stop

blinking and show 3:50.

(2) Press the CRUST CONTROL key to select

either "LIGHT", or "REGULAR".

Approximately 30 to 35 minutes

later, a beep will sound, this

signal is for adding extra

ingredients. (If the recipe does

not require extra ingredients,

please ignore the beep signal.)

Caution: The main body gets hot

during the baking.

Rotating Shaft

3. Measure all the ingredients into the baking pan

in order listed in the recipe book or as follows;

(1) Pour in water

(2) Add butter, sugar, salt, and dry milk

(3) Add flour; make a depression in the middle

of the flour and sprinkle yeast ("Rapid Rise"

yeast) into it, ensuring that the yeast does not

touch any liquids.

Advertising