Rebuild array – XFX 650I User Manual
Page 100
Installing and Configuring the XFX nForce 650i Ultra Motherboard
86
Rebuild Array
The Rebuild Array option allows you to rebuild a disk in the array while the
system is running without disrupting user or application access to the data set.
Note:
Rebuilding an array can take up to a full day to complete. This operation
occurs in the background and does not impede any work being done. If you
need to shutdown, the rebuild operation continues upon restart.
Use the following procedure to rebuild an array:
1. Identify the affect disk in the array and replace it.
2. Click on
Rebuild Array
under Management to launch the NVIDIA Rebuild
Array Wizard.
3. Click
Next
to continue with the
wizard and display the RAID
Array Selection menu.
4. Select the array with that had
the affected disk and click
Next
.
Rebuilding a degrading array
adds a new disk to that array.
Data from the healthy disk is
rebuilt onto a new disk.
Note:
Rebuilding a healthy RAID
array resynchronizes the
data set onto a disk.