XFX 650I - Manual (Page 42)

Installing and Configuring the XFX nForce 650i Ultra Motherboard
28
The following items on the CMOS Setup Utility main menu are commands
rather than submenus:
Load Defaults
Load default system settings.
Set Password
Use this command to set, change, and disable the password used to access the
BIOS menu.
Save & Exit Setup
Use this command to save settings to CMOS and exit setup.
Exit Without Saving
Use this command to abandon all setting changes and exit setup.
The following two items on the CMOS Setup Utility main menu are status
indicators: