Yamaha HTR-5960 - Manual (Page 81)

77
SOUND FIELD PROGRAMS
SOUND
FIELD
PR
OGRAMS
REV.LEVEL Reverberation level. Adjusts the volume of the reverberation sound. The larger the value, the
stronger the reverberation becomes.
Control range: 0 to 100%
DIALG.LIFT Dialog lift. Adjust the height of the front and center channel sounds by assigning some of the
front and center channel elements to the presence speakers. The larger the parameter, the higher
the position of the front and center channel sound.
Choices: 0, 1, 2, 3, 4, 5
2ch Stereo
DIRECT
2-channel stereo direct. Bypasses the decoders and DSP processors of this unit for pure hi-fi
stereo sound when playing 2-channel analog sources.
Choices: AUTO, OFF
y
• The “AUTO” setting bypasses the decoders and DSP processors only when “BASS” and
“TREBLE” are set to 0 dB (see page 39).
• When multi-channel signals (Dolby Digital and DTS) are input, they are downmixed to 2
channels and output from the front left and right speakers.
• The low-frequency signals input from the front left and right speakers are redirected to the
subwoofer in the following cases:
– “LFE/BASS OUT” is set to “BOTH” (see page 88).
– “FRONT SP” is set to “SMALL” (see page 86) and “LFE/BASS OUT” is set to “SWFR”
(see page 88).
7ch Stereo
CT LEVEL
SL LEVEL
SR LEVEL
SB LEVEL
PL LEVEL
PR LEVEL
7-channel stereo center, surround left, surround right, surround back, presence left and presence
right levels. Adjusts the volume level of each channel in the 7-channel stereo mode.
Control range: 0 to 100%
Sound field parameter Features
(dB)
60 dB
Le
v
el Source sound
Reverberation
REV.TIME REV.DELAY
Time