Xantrex Technology XDC 80-75SL - Manual (Page 26)

Specifications and Characteristics
Electrical Specifications—Summary
24 Operating Manual for XDC Series Slave Power Supply
Electrical Specifications—Summary
Table A.1Specifications for 10V to 60V Models
Table A.2Drift Specifications for 10V to 60V Models
Models 10-600 20-300 30-200 40-150 60-100
Output Ratings:
Output Voltage
1
Output Current
2
Output Power
1. Minimum output voltage is <0.3% of rated voltage at zero output setting.
2. Minimum output current is <0.2% of rated current at zero output setting when measured with rated load resistance.
0–10 V
0–600 A
6000 W 0–20 V
0–300 A
6000 W 0–30 V
0–200 A
6000 W 0–40 V
0–150 A
6000 W 0–60 V
0–100 A
6000 W
Line Regulation:
3
Voltage (0.01% of Vmax)
Current (0.05% of Imax)
3. For input voltage variation over the AC input voltage range, with constant rated load.
1 mV
300 mA 2 mV
150 mA 3 mV
100 mA 4 mV
75 mA 6 mV
50 mA
Load Regulation:
4
Voltage (0.05% of Vmax + 5 mV)
Current (0.1% of Imax + 20 mA)
4. For 0–100% load variation, with constant nominal line voltage.
10 mV
620 mA 15 mV
320 mA 20 mV
220 mA 25 mV
170 mA 35 mV
120 mA
Output Noise (0–20 MHz):
Voltage (p–p) 75 mV 75 mV 75 mV 75 mV 100 mV
Output Ripple (rms):
Voltage
Current
5
5. Current mode noise is measured from 10% to 100% of rated output voltage, full current, unit in CC mode.
10 mV
3100 mA 10 mV
1600 mA 12 mV
1000 mA 15 mV
750 mA 15 mV
450 mA
OVP Adjustment Range:
(0% to 103% of Vmax) 0–10.3 V 0–20.6 V 0–30.9 V 0–41.2 V 0–61.8 V
Efficiency:
6
6. Typical efficiency at nominal input voltage and full output power.
0.85 0.87 0.87 0.87 0.89
Models 10–600 20–300 30–200 40–150 60–100
Drift (30 minutes):
1
Voltage (0.04% of Vmax)
Current (0.6% of Imax)
1. Maximum drift over 30 minutes with constant line, load, and temperature, after power on.
4 mV
3600 mA 8 mV
1800 mA 12 mV
1200 mA 16 mV
900 mA 24 mV
600 mA
Drift (8 hours):
2
Voltage (0.02% of Vmax)
Current (0.04% of Imax)
2. Maximum drift over 8 hours with constant line, load, and temperature, after 30 minute warm-up.
2 mV
240 mA 4 mV
120 mA 6 mV
80 mA 8 mV
60 mA 12 mV
40 mA
Temperature Coefficient:
3
Voltage (0.04% of Vmax/°C)
Current (0.06% of Imax/°C)
3. Change in output per
°C change in ambient temperature, with constant line and load.
4 mV
360 mA 8 mV
180 mA 12 mV
120 mA 16 mV
90 mA 24 mV
60 mA
TM-XDSL-01XN.book Page 24 Tuesday, November 5, 2002 3:22 PM