Xantrex Technology PROwatt 1000 - Manual (Page 21)

Remote On/Off Switch
2–5
Remote On/Off Switch
Figure 2-3 Remote On/Off Switch
Feature Description
➀ ➀ ➀ ➀ Switch Panel The 2 1/2 inch wide x 4 1/4 inch high (6.35 cm x
10.80 cm) panel mounts flush and requires 0.7 inches (18 mm) of
depth. See
page 3–10 for installation instructions and Figure D-1
on page D–5 for a mounting template.
➁ ➁ ➁ ➁ Cable and Connector The cable (20 feet; 6 m) is permanently
attached to the back of the switch. The connector plugs into the jack
on the bottom of the inverter.
➂ ➂ ➂ ➂ INVERTER ON indicator Lights up when the inverter is on.
➃ ➃ ➃ ➃ Touch Control On/Off Button
IN VE R TE R O N
R E M O TE S W ITC H
➀
➁
➂
➃
PROWatt100.book Page 5 Friday, January 5, 2001 3:03 PM