Zanussi ZTK123 - Manual (Page 10)

10
Load the laundry
Connect the appli-
ance. Open the door
(see picture).
Place the laundry in
the drum, one item at
a time, shaking them
out as much as possi-
ble. Close the door.
Please check the
laundry does not get
caught between the
door and filter.
Select the required
programme
Turn the programme
selector dial to the
required programme.
The light Start/Pause
starts to flash.
The selector dial is
divided into following
sections:
• Time
Allows you to time
controlled drying. Turn
the dial to the
required time.
The selector dial can
be turned clockwise.
The lights Drying, and
End come on.
At the end of the
programme the
selector dial must
be turned to posi-
tion O, to switch the
machine off.
Attention!
If you turn the pro-
gramme selector dial
to another programme
when the machine is
working, the lights of
the programme
progress display start
to flash. The machine
will not perform the
new selected pro-
gramme.
Programme
Option buttons
Depending on the
programme, different
functions can be com-
bined. These must be
selected after choos-
ing the desired pro-
gramme and before
depressing the
Start/Pause button.
When these buttons
are pressed, the cor-
responding pilot lights
come on. When they
are pressed again,
the pilot lights go out.
Delicate
Pressing this button
allows drying to be
performed at a lower
temperature, for deli-
cate items.
The corresponding
pilot light comes on.
This option can also
be used for time con-
trolled drying.
DELICATE is only
suitable for use with
loads of up to 3kg!
When the programme
has finished the pilot
lights End is on.
Select the Textile
Press the Textile
button repeatedly, to
select the desired
option. The relevant
light will light up.
You can select 2 dif-
ferent options:
Cotton Cycle :
to be used for cot-
ton, When the
programme has
finished the pilot
lights End is on.
Synthetics
to
be used for syn-
thetic or delicate
items.
When the programme
has finished the pilot
lights End is on.
Start/Pause
1149
P1108
Operating sequence