Zoom Dialer 27 - Manual (Page 12)

8 Hotline Dialer Installation & User Guide
Suppose you want to program your dialer to call a server, wait for a voice
prompt, and then deliver an identifying string followed by a pound sign.
Suppose the server's phone number is 1 888 555-3333, and the ID string is
0123456789#. You could program the dialer to do this as follows:
1. Take your phone off-hook
2. Enter
# 0 # 1 8 8 8 5 5 5 3 3 3 3 #
3. Listen for two confirmation beeps
4. Place your phone on-hook
5. Take your phone off-hook
6. Enter 1 # * 4 # #
7. Listen for two confirmation beeps
8. Place your phone on-hook
9. Take your phone off-hook
10. Enter # 1 # 0 1 2 3 4 5 6 7 8 9 #
11. Listen for two confirmation beeps
12. Place your phone on-hook
13. Take your phone off-hook
14. Enter # * 0 # # #
15. Listen for two confirmation beeps
16. Place your phone on-hook
Note: The maximum total number of characters in a dialer string is 96.
For each number, count the number of DTMF digits in the number plus
one. The *2, *4, and *5 instructions each count as three characters, the
* 0 n instruction counts as 4 characters, and the *1 PPP instruction
counts as 6 characters. For the above examples, the total number of
characters are 26 and 30, respectively.