Zoom Dialer 27 - Manual (Page 14)

10 Hotline Dialer Installation & User Guide
than 10, you must enter the first digit 0. For example, if your domestic toll
calls are 8 digits long, you must enter 08.
If the length of a domestic toll call in your location is variable, enter 00.
Set the Domestic Toll Prefix
To set the domestic toll prefix, do the following:
1. Take your phone off-hook
2. Press # 6
3. Enter ddd, where ddd is the 1, 2, or 3 digit prefix for a domestic toll call
4. Press # #
5. Listen for two confirmation beeps
6. Place your phone on-hook
ddd is the domestic toll call prefix. The default value is 1. Enter your
complete domestic toll prefix, up to three digits. If your toll prefix is less than
three digits, enter only the digit or digits used. Do not enter extra digits to
bring the total to three.
Note: If you want to restrict any local calls, enter * for ddd instead of your
domestic toll prefix. This will enable the dialer to restrict calls starting with
an arbitrary digit. Otherwise the dialer can only restrict calls which start
with either the domestic or international prefix.
Note: Leave ddd blank if you don't want to restrict any domestic calls.
Set the International Toll Prefix
To set the international toll prefix, do the following:
1. Take your phone off-hook
2. Press # 7
3. Enter iii, where iii is the 1, 2, or 3 digit prefix for an international toll
call
4. Press # #
5. Listen for two confirmation beeps
6. Place your phone on-hook
iii is the international toll call prefix. The default value is 011. Enter your
complete international toll prefix, up to three digits. If your toll prefix is less
than three digits, enter only the digit or digits used. Do not enter extra digits
to bring the total to three.
Note: Leave iii blank if you don't want to restrict any international calls.
Set Toll Restriction
To restrict a call that starts with a certain DTMF sequence, do the following:
1. Take your phone off-hook
2. Press # 98
3. Enter sequence which is a sequence of 1 to 15 DTMF digits
4. Press # #