Zoom Dialer 27 - Manual (Page 21)

Frequently Asked Questions 17
To remove a single restricted number, do the following:
1. Take your phone off-hook
2. Press # 92
3. Enter the sequence you used to set the restriction or allowed
number
4. If the sequence is less than 7 digits, add *'s to bring the total to 7
digits
5. Press 9
6. If the sequence is 7 digits or more, stop after the seventh digit
7. Press 8
8. Press # #
9. Listen for two confirmation beeps
10. Place your phone on-hook
To remove a single allowed number, do the following:
1) Take your phone off-hook
2) Press # 92
3) Enter the sequence you used to set the restriction or allowed
number
a) If the sequence is less than 7 digits, add *'s to bring the total to
7 digits
(i) Press 7
b) If the sequence is 7 digits or more, stop after the seventh digit
(i) Press 8
4) Press # #
5) Listen for two confirmation beeps
6) Place your phone on-hook
Note: If a password is active, you need to use the password for the
commands above.
Examples:
To remove the restricted sequence 1, enter # 9 2 1 * * * * * * 9 # #.
To remove the allowed sequence 1 415, enter # 9 2 1 4 1 5 * * * 7 # #.
To remove the allowed sequence 1 501 555 1234, enter
# 9 2 1 501 555 8 # #.
Q: I set a number to be restricted, and then changed it to be allowed,
but it is still restricted.
A: You need to remove the restricted number before you can change it to be
allowed. Please see the question above.
Q: I removed a restricted sequence, but it is still restricted.
A:
If the restricted sequence is longer than 7 digits, and shares the first 7
digits with other restricted or allowed sequences, one of the other
sequences may have been removed instead. The best approach in this
situation is to remove all sequences with the # 9 3 # # command.