Xantrex Technology Solar 400 - Manual (Page 39)

AC Appliances
975-0328-01-01 23
Operating AC Appliances
Low-Battery Alarm
While in use, when the battery reaches 11 Vdc, the
Low-Battery Alarm will sound and display an error code
indicating that battery is low and the unit is about to be
shutdown to prevent battery damage.
When the battery reaches 10.5 Vdc, the unit will
automatically disconnect power to the AC sockets.
If the alarm sounds, disconnect any loads that may be in
use and recharge the unit as soon as possible.
Figure 3-6 Operating AC Appliances
1. Press and hold the AC button for one
second to activate the AC sockets.
2. Check the state-of-charge to ensure
the battery is fully charged.
3. Open the AC socket cover.
4. Plug the appliance into one of the AC
sockets and turn the appliance on.
5. Unplug or turn off the appliance when
not in use to conserve energy.
6. Press and hold the AC button again
to deactivate the AC sockets.
1.
Note : Recharge the Powerpack
as soon as battery level dips below
normal.