Xerox 155 - Manual (Page 33)

Controller components and options
Installation Planning Guide 2-5
The Sun Blade 2500 contains the following hardware
components:
• Processor (system unit) containing the following:
– One UltraSPARC IIIi high-speed processing unit (CPU)
module
– 1 or 2 GB of memory (one or two 1-GB Dual In-line
Memory Modules, or DIMMs)
• DP 100, 115, and 135: 1GB
• DP 155 and 180: 2 GB
NOTE: In Xerox Europe, all printers use a 2 GB memory
configuration.
– 36 GB hard disk drive
– High-density, read-only DVD-ROM drive
– Ethernet
– One or two Printer Controller Interface (PCI) boards to
interface with the printer
• DP 100, 115, and 135: 1 board
• DP 155 and 180: 2 boards
– XVR-100 video graphics board
• Universal Serial Bus (USB) keyboard and three-button
mouse
• 17-inch flat panel monitor
• Diskette drive (external)
Processor The central processing unit contains the memory, internal disk
drive, a graphics board, a DVD-ROM drive, a diskette drive,
power receptacle and outlet, connectors and ports.
• Memory: Two 1 GB Dual In-line Memory Modules, or
DIMMs, are provided as a standard feature of the processor.
• Hard disk drive: A 36 or 73 GB primary disk drive is
provided as a standard feature of the processor. The
operating system, the NPS/IPS application, and any queued
print jobs are stored on the internal disk. This disk cannot be
used to store other applications or data except as directed by
your service representative.