Xerox 155 - Manual (Page 56)

Controller requirements and specifications
5-4 Installation Planning Guide
Sun Blade 1000/2000 environmental requirements
• Temperature: 32 to 104 degrees F / 0 to 40 degrees C
• Humidity: 5 to 80% (relative non-condensing)
• Altitude: 0 to 10,000 feet (0 to 3,050 m) above sea level
• Heat dissipation: 1,100 BTU per hour (processor and
monitor)
For recommended environmental ranges for the printer work
area, refer to the “Printer specifications and requirements”
chapter of this guide.
Sun Blade 2500 environmental requirements
• Temperature:
– Without tape drive: 32 to 104 degrees F/0 to 40 degrees C
– With tape drive: 41 to 95 degrees F/5 to 35 degrees C
• Humidity: 10 to 93% (relative non-condensing)
• Altitude: 0 to 9842.5 feet / 0 to 3,000 m above sea level
• Heat dissipation: 1,570 BTU per hour (processor and
monitor)
For recommended environmental ranges for the printer work
area, refer to the “Printer specifications and requirements”
chapter of this guide.
Space requirements
This section provides recommendations for placement of
controller hardware components.
For printer component space requirements, refer to the “Printer
specifications and requirements” chapter of this guide. Contact
your service representative if you have questions not specifically
addressed in this guide.