ZyXEL Communications 2000W_V2 - Manual (Page 11)

Prestige 2000W_V2 Quick Start Guide
11
3 Scroll to Registrar and press the OK key.
2. OutboundProxy
3. Proxy Server
Select Back
4 Scroll to Registrar IP and press the OK key.
2. Port
3. Expiry Time
Select Back
5 You will enter your registrar server’s IP address or domain name here.
The bottom center of the screen shows the keypad mode Aa1@, with the A
mode highlighted. Use the up and down arrows to select capital letters (A),
lowercase letters (a), numbers (1), or symbols (@).
Registrar IP
mysip.proxy.com
Ok A 1@ Clear
6 Use the keypad to enter your registrar server’s IP address or domain name.
Use the Power/End key to clear the default text and remove typos. You may
need multiple keypad presses to enter letters. For example, to enter a
lowercase “b”, press the down arrow key to select lowercase mode (a), then
press the “2” key twice. Press the OK key when you are done.
Registrar IP
mysipprovider.com
Ok A 1@ Clear
7 Scroll to Port and press the OK key.
3. Expiry Time
1. Registrar IP
Select Back
8 Use the keypad to enter the registrar server’s listening port number if you were
given one. Use the Power/End key to clear the default text and remove typos.
Leave the default port number if you were not given one to use.
9 Press the OK key when you are done.
Port
5060
Ok Aa @ Clear
1. Registrar
1. Registrar IP
a
a
2. Port
1