ZyXEL Communications 2000W_V2 - Manual (Page 4)

Prestige 2000W_V2 Quick Start Guide
4
1 Charging Your Phone
Do the following to charge the Prestige for use.
Note: Charge the battery for two hours before using your Prestige.
The battery provides approximately 3.5 hours of talk time and 21-22 hours of standby time when fully charged.
Remember to reconnect the phone to the power adaptor when not in use.
1 Remove the battery cover. Press the silver
button on the back of the Prestige and slide the
battery cover with your other hand.
2 Insert the battery. With the battery’s CE label facing
up, put the end with the contacts in first and press the
battery down into place.
3 Place the battery cover back on. Slide the
cover towards the top until it clicks into place.
4 Remove the gray rubber cover from the bottom of
your phone. Use the included power adaptor (use
only this adaptor) to connect the phone to an
appropriate power outlet.
The OK key
turns on bright red.