ZyXEL Communications PRESTIGE 128 - Manual (Page 132)

System Maintenance 119
Figure 14-2 Example of Menu 24.1 - System Maintenance - Status
1. To get to the System Status, select option 24. System
Maintenance. This will bring you to Menu 24 - System
Maintenance.
2. From this menu, select option 1. System Status.
3. There are four (4) possible commands in Menu 24.1 - System
Maintenance - Status. Entering 1 will disconnect the current B1
channel call; 2 will disconnect the current B2 channel call, 3
will reset the counters; and ESC will exit this screen.
4. Items 5 - 26 describes the fields present in Menu 24.1 - System
Maintenance - Status. It should be noted that these fields are
READ-ONLY and are meant to be used for diagnostic
purposes.
5. ISDN - shows statistics for B1 and B2 channels respectively.
These are the information displayed for each channel:
6. Link - shows the Remote Node the channel is currently
connected to or the status of the channel (Idle, Calling, or
Answering).
7. Type - the current connecting speed (56K or 64K).