ZyXEL Communications PRESTIGE 128 - Manual (Page 20)

Introduction 7
•
One LAN crossover cable (red tag).
•
One LAN straight cable (white tag).
•
One Prestige Support Disk.
•
One Prestige 128/100 Quick Start Guide.
•
This Prestige 128 User’s Manual.
Additional Installation Requirements
In addition to the contents of your package, there are other
hardware and software requirements you need before you can
install and use your Prestige. These requirements include:
•
An ISDN telephone line.
•
An Ethernet connection to your computer.
•
A computer equipped with communications software
configured to the following parameters:
•
VT100 terminal emulation.
•
9600 Baud rate.
•
No parity, 8 Data bits, 1 Stop bit.
After the Prestige has been successfully connected to your
network, you can make future changes to the configuration by
using a Telnet application.