Operating sequence, Load the laundry, Measure out the detergent and the fabric softener – Zanussi jetstream ZJD12191 User Manual

Page 11: Jetsystem» wash, Switch the machine on, Select the required programme, Washing only

Advertising
background image

11

Operating Sequence

Washing only

Before the first wash, we recommend that you run a
cotton cycle at 95°C, without any laundry in the
machine, to remove any manufacturing residue from the
drum and tub.
Pour 1/2 a measure of detergent into the main wash
compartment

of the dispenser drawer and start the

machine.

1. Load the laundry

Open the door by pulling the door handle outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.

2. Measure out the detergent

and the fabric softener

Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and pour
it into the main wash compartment

.

If you have selected the

PREWASH

option, pour detergent

into the compartment marked

.

If required, pour fabric softener into the compartment
marked

(the amount used must not exceed the

“MAX” mark in the drawer). Close the drawer gently.

«JETSYSTEM» wash

As the Jetsystem is flexible and adjusts water intake
according to wash load size it is not possible to give you
exact recommandations as to the amount of detergent
that should be used for any one wash.

P0005

P0006

P0004

Therefore we recommend that you use approximately
1/3 less than the detergent manufacturer recommends on
the packet or bottle, making the appropriate allowances
for soft or hard water, and light or heavy soilage of
clothes. If you have judged the amount correctly you
should expect to see a soft sudsy liquid during the wash.
It is not necessary to have a head of lather on the water.

3. Switch the machine on

To switch the machine on, press the O

N

/O

FF

button: the

mains-on light comes on. The display will show three
flashing dashes or a blinking zero.

If the programme selector dial is on the Reset X
position, three flashing dashes will be displayed. If the
programme selector dial is positioned on a wash
programme, a flashing zero appears on the display.

4. Select the required programme

Turn the programme selector dial to the desired
position: the lights corresponding to the different phases
making up the selected programme light on.

The display shows the duration of the programme.

2.05

WASH

DRYING

DOOR

PREWASH

SPIN

END

RINSES

DRAIN

95º

E

60º

40º

30º

60º

40º

30º

40º

30º

X

40º

COTTON

DELICATES

SYNTHETICS

WOOL

60º

SPECIAL

40ºE

60ºE

30º

---

0

ON/OFF

Advertising