4 encrypt button behavior, Table 3 time e, 41 4.4 encrypt button behavior – ZyXEL Communications PLA470 V2 User Manual
Page 41
Chapter 4 The ENCRYPT Button
PLA-4xx Series User’s Guide
41
4.4 ENCRYPT Button Behavior
The following table summarizes the actions that occur when the ENCRYPT button is pressed
for specific lengths of time.
See Troubleshooting in
for suggestions on problems with the
ENCRYPT button and the lights.
Table 3 Time ENCRYPT Button is Pressed and Action
TIME
ACTION
POWER LIGHT BEHAVIOR
HOMEPLUG LIGHT
BEHAVIOR
less than 3
seconds
The device joins a network. It
shares the same network name
as other devices on the network.
The power (
) light blinks until
the device is connected. This
may take a minute.
The HomePlug (
) light turns
on if your device is connected to
another powerline device or a
powerline network.
more than
10 seconds
The device leaves any network
it is associated with and its
network name assumes a
random value.
The power (
) light blinks
several times and then shines
steadily.
The HomePlug (
) light blinks
red one time and then turns off
when it disconnects from the
powerline network.