ZyXEL Communications PLA470 V2 - Manual (Page 56)

Chapter 6 Powerline Network Setup Tutorial
PLA-4xx Series User’s Guide
56
Figure 34 Adding a New Adapter
3 Select your adapter by selecting Local and type the network name for your existing
network in the Network Name field (C).
Figure 35 Adding an Adapter to an Existing Network
4 Click Save and click OK on the pop-up.
Figure 36 Network Name Pop-up
5 Your new adapter will now have the same Network Name as your existing network and
so has now joined your existing network.
6 Connect the adapter to the device you want to add to the network, for example, your
Internet refrigerator in the kitchen.
7 Plug the adapter’s power cord into a power outlet and, if required, switch the power
outlet on.
8 Repeat this procedure for all additional powerline adapters that you want to add to your
existing or new powerline network.
A B
C