Zoom X4 - Manual (Page 20)

20 X4 ADSL Modem User’s Manual
User Name Supplied by your service provider.
Password Supplied by your service provider.
Service Name Optional; supplied by your service provider.
Disconnect Time ADSL connection will be dropped after the
ADSL line is idle for a certain amount of time
(measured in seconds). Select 0 to ensure
that you won’t be disconnected.
Authentication PPP user authentication method. Default is
Auto; you can specify CHAP or PAP only.
Automatic Reconnect Disabled by default. Check this box if you
want to be reconnected automatically if the
ADSL connection is terminated
unexpectedly.
DHCP (Dynamic Host Configuration Protocol)
Typically, you should not need to change your DHCP setting. The
only case when you might want to change it is if your provider is
using Bridged or Routed IP Encapsulation. Your service provider
will instruct you.
DHCP client enable Check this box only if instructed to by your
service provider.
Host Name If necessary, supplied by your service
provider.
2.3 LAN Settings
By modifying your LAN ADSL setup and DHCP settings, you can
control the number of computers that can connect to the X4. The
default address range allows 12 computers to join the network. To
change your settings, from the Advanced Setup page click the
LAN Settings button.