Zoom X4 - Manual (Page 21)

Chapter 2: Advanced Setup Options 21
IP Address X4’s IP address. Default is 10.0.0.2.
Subnet Mask X4’s subnet mask address. Default is
255.255.255.0.
DHCP Server Enabled by default.
DHCP Address Pool
Selection The DHCP Address Pool is based on the
X4’s IP address plus 12 IP addresses; for
ex., the X4’s default IP address is 10.0.0.2;
so the DHCP Address Pool is 10.0.0.3-
10.0.0.14. Default is System Allocated. A
pool of 253 (max.) User-Defined addresses
is optional.
User Defined Start
Address Starting address of IP address pool.
User Defined End
Address Ending address of IP address pool.
Lease Time Measured in days, hours, minutes, and
seconds. Default is 0—lease time will never
run out.
User Mode Default is Multi-User.