Zoom X4 - Manual (Page 27)

Chapter 2: Advanced Setup Options 27
To set this static IP address, go to Start | Settings | Network
and Dial-up Connections. Right-click Local Area
Connection and select Properties. Click the Install button.
Select the Internet Protocol TCP/IP option and click
Properties. Click the radio buttons Use the following IP
address and Use the following DNS server addresses, enter
the following data, and click OK.
IP address 10.0.0.15
Subnet mask 255.255.255.0
Default gateway (X4’s LAN IP address) 10.0.0.2
Preferred DNS server 10.0.0.2
Note: These TCP/IP instructions and screenshot are typical of a
computer using Windows 2000 or XP; if you are using
Windows 98 or Me, yours may differ slightly. If you are
using Windows 95, or are a Macintosh or Linux user, and
need help with your TCP/IP settings, turn to the
Appendix on page 46. Otherwise, continue to Step 4.