Yamaha CP 33 - Manual (Page 18)

Playing Voices
CP33 Owner’s Manual 18
Ref
erence
[EFFECT]
The [EFFECT] button allows you to select an effect to give your sound greater depth and animation.
• OFF . . . . . . . . . . .When no effect is selected, no EFFECT indicator is lit.
• CHORUS . . . . . . .Adds depth and richness to the sound.
• PHASER . . . . . . . .Adds a sweeping effect to the sound.
• TREMOLO . . . . .Adds an animated, vibrating effect to the sound.
• ROTARY SP . . . . .Adds the vibrato effect of a rotary speaker.
To select an effect type, press the [EFFECT] button a few times until the indicator corresponding to the
desired type lights (the indicators light in sequence each time you press the [EFFECT] button). No effect is
produced when all indicators are off.
• Default settings: The default effect type (including OFF) and depth settings are different for each voice.
Adjusting Effect Depth
You can adjust the effect depth for the selected voice by using the [NO/–] and [YES/+] buttons while holding
the [EFFECT] button.
Default depth settings are different for each voice. The depth range is from 0 (no effect) through 20 (maximum
effect depth). The current depth setting appears on the display while the [EFFECT] button is held.
n Releasing the [EFFECT] button changes the effect type. If you hold down the [EFFECT] button to change the
depth, the effect type will not be changed.
You can select four different types of keyboard touch sensitivity—HARD, MEDIUM, SOFT or FIXED—to
match different playing styles and preferences.
• HARD . . . . . . . . .Requires that the keys be played quite hard to produce maximum loudness.
• MEDIUM . . . . . . .Produces a fairly "standard" keyboard response.
• SOFT . . . . . . . . . .Allows maximum loudness to be produced with relatively light key pressure.
• FIXED . . . . . . . . .All notes are produced at the same volume no matter how hard the keyboard is played.
(No indicators are lit.) The fixed volume can be changed.
n This setting does not change the weight of the keyboard.
To select a touch sensitivity type, press the [TOUCH] button a few times until the indicator corresponding to
the desired type lights (the indicators light in sequence each time the [TOUCH] button is pressed). No
indicator is lit when "FIXED" is selected.
• Default setting: MEDIUM
Touch Sensitivity—[TOUCH]
BRILLIANCE REVERB EFFECT TOUCH
BRIGHT
NORMAL
MELLOW
HALL 1
HALL 2
STAGE
PHASER
TREMOLO
CHORUS
ROTARY SP
HARD
MEDIUM
ROOM
SOFT
PANEL
LOCK
BRILLIANCE REVERB EFFECT TOUCH
BRIGHT
NORMAL
MELLOW
HALL 1
HALL 2
STAGE
PHASER
TREMOLO
CHORUS
ROTARY SP
HARD
MEDIUM
ROOM
SOFT
PANEL
LOCK