Yamaha CP 33 - Manual (Page 41)

Detailed Settings
CP33 Owner’s Manual 41
Ref
erence
F8. Backup Functions
These allow you to back up some settings, such as Voice
selection and Reverb type, so that they will not be lost
when you turn off the power to the CP33. If the Backup
function is turned on, the settings at power off are
effective. If the Backup function is turned off, the settings
in memory are erased when you turn off the power. In this
case, when you turn on the power to the unit, the default
settings (the initial settings) will be used. (The factory
setting list is found on page 48.)
However, the Backup Function on or off is always backed
up.
You can turn the backup function on or off for each
function group. Different Backup Groups are provided for
the different function categories of the instrument: Voice,
MIDI, Tuning and Others.
Voice
• Setting range: ON/OFF
• Default setting: OFF
- Voice (Keyboard, Dual, and Split)
- Dual (ON/OFF, Voice, and Dual Functions for each
voice combination)
- Split (ON/OFF, Voice, and Split Functions for each
voice combination)
- Reverb (ON/OFF, Type, and Depth for each voice)
- Effect (ON/OFF, Type, and Depth for each voice)
- Touch Sensitivity (including the FIXED volume)
- Click Beat, Volume (
settings)
MIDI
• Setting range: ON/OFF
• Default setting: ON
- The MIDI functions ( settings) (expect for
)
Tuning
• Setting range: ON/OFF
• Default setting: ON
- Transpose
- Tuning (
settings)
- Scale (including base note) ( settings)
Others
• Setting range: ON/OFF
• Default setting: ON
- Other functions ( settings)
Factory Preset Recall
All settings affected by the Functions (F1 – F8) can
be restored to their original factory preset values by
turning the [STANDBY/ON] switch ON while
holding the rightmost white key (C7) and black keys
(F 6, G 6 and A 6). The factory-preset values are listed
on page 48.
After turning the [STANDBY/ON] switch ON while
holding the rightmost white key (C7) and black keys (F 6,
G 6 and A 6), "
CLr " appears in the display. Never
attempt to turn off the power while " CLr " appears in the
display. Turning the power off in this state may cause the
system to freeze.
BRILLIANCE REVERB EFFECT TOUCH
BRIGHT NORMAL MELLOW HALL 1 HALL 2 STAGE PHASER TREMOLO CHORUS ROTARY SP HARD MEDIUM ROOM SOFT
FOOT PEDAL
SUSTAIN
STANDBY ON
AUX
PANEL LOCK
CAUTION