Yamaha AR-80 - Manual (Page 167)

161
TRANSPOSE Buttons
Transpose can also be set from the panel, with the TRANSPOSE
´ / Ï buttons. Press TRANSPOSE Ï to raise the Transpose
setting by a half-step, and press TRANSPOSE ´ to lower it.
The current Transpose setting is shown in the Voice Display.
Current Transpose setting.
HELP
DISK
ACCOMP.
PROGRAM
M.O.C./
L.M.SPLIT
FOOT
SW.
VOICE
DISPLAY
HOLD
PITCH/
MIDI
SEQUENCE
PROGRAM
VOICE
EDIT
REGIST.
SHIFT
EFFECT
SET
TRANSPOSE
DATA CONTROL COARSE
TRANSPOSE
• The default Pitch setting is
440.0Hz (at A3).
• Pitch changes cannot be
recorded to the Music Disk
Recorder.
When tuning the AR-80 to
match the pitch of another
instrument, use the Clarinet
voice on the Lower keyboard,
and make sure that effects
such as Tremolo or
Symphonic are turned off.
About the Pitch of the Voice Sections
The various Voice sections and sounds of the instrument are set to different pitches (as shown
below).
-3.6
-1.2
(Standard 440Hz) 0
+1.2
+2.4
+3.0
+6.0
Cent
PEDAL1&2, PEDAL ORGAN
LOWER2
LOWER1, LOWER ORGAN, KEYBOARD PERCUSSION, ACCOMPANIMENT
UPPER2
UPPER1
UPPER ORGAN
LEAD1