Yamaha AR-80 - Manual (Page 41)

35
VIBRATO Page
Select the Vibrato page by pressing the corresponding Menu button.
The Vibrato page for the Lead Voice section has additional Slide and Tune settings (unlike that
of the Upper and Lower sections). The Pedal Voice sections have no Vibrato page.
1 VIBRATO
PRESET/USER (See next page for detail on USER VIBRATO.)
Selects Preset, which calls up the original (factory) Vibrato
settings for the Voice, or User, which lets you adjust the Vibrato
settings yourself.
2 TOUCH (Touch Vibrato)
Determines whether Touch Vibrato is on or off. Touch Vibrato
lets you apply Vibrato to individual notes as you play them.
While playing a key, press down harder on it to give the note
Vibrato. The harder you press the key down, the greater the
Vibrato will be.
3 SLIDE (Lead Voices only)
Slide applies a portamento effect to notes played in legato. For example, if you play one
note, then play another before completely releasing the first note, the pitch of the first note
will “slide” up or down to the second note. The Slide function is effective within a one-
octave range.
• ON/KNEE/OFF
On/Off switch and knee lever selector for the Slide function.
• TIME
Determines the speed of the Slide or portamento effect. The higher the value, the slower the
speed.
CONTRAST
PAGE
1 2 3 4
The Delay, Depth, and Speed
settings are not displayed and
cannot be adjusted unless USER
has been selected in this setting.
When DEPTH (below) is set to
0, Touch Vibrato is inactive.