4XEM IPCAMWL40 User Manual
Page 26
- 25 -
3. Open an FTP client program and connect to the Network Camera. The user name and
password is as same as the Administrator’s.
4. Transfer user.htm in local folder to the Network Camera,
5. Close the FTP program and reload the homepage of the Network Camera,
6. Click on “Configuration” on homepage,
7. Click on “Homepage layout” at the left column,
8. Check “Use the customized homepage”.
9. Click on “Save” button and return to homepage.
* The user.htm only provides plain text content that scripts and URL of external
resources can be used to adorn the homepage. Refer to tutorials of writing HTML and
scripts.
If the customized homepage goes wrong and cannot display, link to the “Homepage
layout” page, “http://<IP address of Network Camera>/setup/layout.html”, to disable
“Use the customized homepage”.