Software installation – 4XEM IPCAMWL40 User Manual
Page 9
- 8 -
Software installation
In this manual, "User" refers to whoever has access to the Network Camera, and
"Administrator" refers to the person who can configure the Network Camera and grant
user access to the camera.
At the end of the hardware installation, users can use Installer program included in the
product CDROM to find the location of the Network Camera. There may be many
Network Cameras in the local network. Users can differentiate the Network Cameras
with the serial number. The serial number is printed on the labels on the carton and the
bottom of the Network Camera body.
The IP addresses shown in the
"Current IP Address" field
reflect those on the local
network. They may be from
the DHCP server. If there is
no DHCP server, the camera
will try to find a free IP
address (this takes from 15
second to 3 minutes,
depending on the LAN status).
The method of finding IP
address is seeking from
192.168.0.99