Epson Perfection 2580 - Manual (Page 2)

Epson Perfection 2580 Photo
2 - Epson Perfection 2580 Photo 6/04
Electrical
Input voltage AC 100 to 120 V
Rated frequency 50 to 60 Hz
Rated current 1.0 A
Power 19.0 W operating (with AFL)
consumption 13.0 W standby mode
5.5 W sleep mode (with AFL)
Environmental
Temperature Operation: 41 to 95 °F (5 to 35 °C)
Storage: –13 to 140 °F (–25 to 60 °C)
Humidity Operation: 10 to 80%
(without Storage: 10 to 85%
condensation)
Operating Ordinary office or home conditions.
conditions Extreme dust should be avoided. Operation
under direct sunlight or near a strong light
source should be avoided.
Safety Approval
EMC FCC Part 15 Subpart B Class B
CSA C108.8 Class B
USB Interface
Interface type Universal Serial Bus Specification
Revision 2.0
Electrical standard Full Speed mode (12 Mbits/s) and
Hi-Speed mode (480 Mbits/s) of Universal
Serial Bus Specification Revision 2.0.
Connector type One receptacle (Type B)
Transparency Unit
Supplied voltage DC 24.0 to 26.4 V
Rated current 0.5 A
35 mm film types Strip: two to six 35 mm frames
Readable width × length:
1.142 × 9.134 inches (29 × 232 mm)
Slide: one 35 mm slide
AC Adapter
Input AC 100 to 120 V, 50 to 60 Hz
Output DC 24.0 to 26.4 V, 1.4 A
Temperature 41 to 95 °F (5 to 35 °C)
Scanning and Restoring Photos
If you have faded photos, slides, or negatives, you can use the
Color Restoration setting in your software to bring them back
to life.
Start EPSON Scan and select Home Mode or Professional
Mode in the Mode box at the top of the screen.
Select your settings and click the Preview button at the bottom
of the screen.
Select the Color Restoration checkbox. (In Home Mode, click
the Image Adjustments button first. In Professional Mode,
scroll to the bottom of the screen.)
For detailed steps, see the on-screen Reference Guide.
Note: You can also use the Color Restoration feature in the EPSON
Smart Panel copy utility. See the on-screen help in the copy utility for
details.
Color Restoration
checkbox Mode box