8e6 Technologies Threat Analysis Reporter TAR 1.0 - Manual (Page 26)

 8
e
6 T
hreaT
a
nalysis
r
eporTer
Q
uick
s
TarT
G
uide
C. Press Y for “Yes” to confirm and save your entries for the LAN1 (eth0) interface, and
to go to the next screen.
D. At the Enter interface LAN2 (eth1) IP address field, enter the IP address for the
LAN 2 (Ethernet 1) interface, and then press Enter to go to the next screen.
E. At the Enter interface LAN2 (eth1) netmask field, using the dotted decimals nota-
tion format, enter the subnet mask for the LAN 2 (Ethernet 1) interface. Press Enter
to display the confirmation prompt.
F. Press Y for “Yes” to confirm and save your entries for the eth1 interface, and to go to
the Configure default gateway screen.