Perform a server action – 8e6 Technologies ER 4.0 User Manual

Page 55

Advertising
background image

A

DMINISTRATOR

S

ECTION

C

HAPTER

2: C

ONFIGURING

THE

ER S

ERVER

8

E

6 T

ECHNOLOGIES

, E

NTERPRISE

R

EPORTER

A

DMINISTRATOR

U

SER

G

UIDE

47

ware Restart process, files normally FTPed to the Server
are routed to a problem directory in the logging device.

When the Server is running again, these files are FTPed
to the Server.

• Shut Down the Server’s Hardware - The Shutdown

Hardware option should only be selected if the Server’s
hardware must be completely shut down—for example, if
the Server box will be physically relocated. When this
option is selected, the Server box shuts off, and files
normally FTPed to the Server will be routed to a problem
directory in the logging device. When the Server is
rebooted, these files will be FTPed to the Server.

• Restart the Server’s Software - The Restart Software

option should be selected if daemons fail to run and/or
the database needs to be started again. When this option
is selected, the MySQL database is rebooted.

• Shut Down the Server’s Software - The Shutdown

Software option should be selected if a software update
needs to be installed on the Server. When the Shutdown
Software option is selected, the MySQL database shuts
off and no files are FTPed to the Server.

Perform a Server Action

1. Click the radio button corresponding to the Server Action

you wish to execute.

2. Click the Apply button to display the warning screen.

3. To proceed with your selection, click the Restart or Shut-

down button on the warning screen. To change your
selection, click the Back button of the browser window to
return to the Shut Down screen.

NOTE: When the Restart Software or Hardware option is
selected, the Server will take five to 10 minutes to reboot. After
this time, you can go to another screen or log off.

Advertising