8e6 Technologies ER 4.0 - Manual (Page 78)

A
DMINISTRATOR
S
ECTION
C
HAPTER
2: C
ONFIGURING THE
ER S
ERVER
70 8
E
6 T
ECHNOLOGIES
, E
NTERPRISE
R
EPORTER
A
DMINISTRATOR
U
SER
G
UIDE
• Current archive data (yearweekno/date scope) - the
range of dates and times of archive data currently stored
on the Server.
The first line displays the range of year(s) and weeks in
the YYYYWW format, where “Y” represents the year, and
“W” represents the week number in that year (01-52).
The second line displays the first date and time in the
range of archive data currently stored on the Server. The
date displays in the YYYY-MM-DD format, and the time
displays in military time (1-24 hours) using the
HH:MM:SS time format.
The third line displays the last date and time in the range
of archive data currently stored on the Server, using the
same format as in the second line of data.
• Total number of archive week(s) - the number of weeks
represented in the archive data date scope.
• Database disk space utilization - the percentage of
space currently being used on the hard drive for both live
and archive data. If a high percentage displays, you may
want to expire data in the near term (see Change Data
Storage Settings).
• (used database space/total database space) - the
amount of space in Gigabytes currently being used on
the hard drive for both live and archive data, and the total
amount of space in Gigabytes (Gbytes) on the hard drive
allocated to database storage.
• Target percentage of live data - the percentage of live
data to be stored on the Server. If this figure is 100, only
live data will be stored. If this figure is less than 100, the
remaining percentage to be stored will be archive data.
The percentage that displays can be changed by
entering and saving a different figure in the Percentage
of live data field in the Change Settings section of this
screen.