3Com 3C16951 User Manual

Page 50

Advertising
background image

50

G

LOSSARY

broadcast storm

Multiple simultaneous broadcasts that typically absorb all the available
network bandwidth and can cause a network to fail. Broadcast storms
can be due to faulty network devices.

collision

A term used to describe two colliding packets in an Ethernet network.
Collisions are a part of normal Ethernet operation, but a sudden
prolonged increase in the number of collisions can indicate a problem
with a device, particularly if it is not accompanied by a general increase
in traffic.

CSMA/CD

Carrier-sense Multiple Access with Collision Detection. The protocol
defined in Ethernet and IEEE 802.3 standards in which devices transmit
only after finding a data channel clear for a period of time. When two
devices transmit simultaneously, a collision occurs and the colliding
devices delay their retransmissions for a random length of time.

endstation

A computer, printer or server that is connected to a network.

Ethernet

A LAN specification developed jointly by Xerox, Intel and Digital
Equipment Corporation. Ethernet networks use CSMA/CD to transmit
packets at a rate of 10Mbps over a variety of cables.

Ethernet address

See MAC address.

Fast Ethernet

An Ethernet system that is designed to operate at 100Mbps.

forwarding

The process of sending a packet toward its destination using a
networking device.

filtering

The process of screening a packet for certain characteristics, such as
source address, destination address, or protocol. Filtering is used to
determine whether traffic is to be forwarded, and can also prevent
unauthorized access to a network or network devices.

flow control

A congestion control mechanism. Congestion is caused by devices
sending traffic to already overloaded port on a Switch. Flow control
prevents packet loss and inhibits devices from generating more traffic
until the period of congestion ends.

full duplex

A system that allows packets to be transmitted and received at the
same time and, in effect, doubles the potential throughput of a link.

half duplex

A system that allows packets to transmitted and received, but not at
the same time. Contrast with full duplex.

16950ua.bk Page 50 Thursday, April 29, 1999 1:28 PM

Advertising
This manual is related to the following products: