3Com Phaser Color Printer 860 - Manual (Page 19)

Advanced Features and Troubleshooting Manual 13
Color and Color Sampler Charts
8. Press the OK key to select that print quality mode.
9. Press the Back key to return to the
Job Defaults Menu
again.
10. Scroll to
Set TekColor Correction
.
11. Press the OK key.
12. Scroll to the color correction you want.
13. Press the OK key to select that color correction.
To print the color sampler chart, on the printer's front panel:
1. With
Menus
highlighted, press the OK key.
2. Press the Scroll Down key to scroll to the
Printable Pages Menu
.
3. Press the OK key.
4. Scroll to either
Print CMYK Sampler Pages
or
Print RGB Sampler Pages
.
5. Press the OK key.
Printing the colors from an application
1. Using the color sampler chart, select the desired colors in your application.
2. From your application, apply the desired colors in your document or graphic by
entering the specific CMYK or RGB values as indicated on the sampler chart.
3. When you print your document or graphic, select the same color correction and print
quality mode in the printer driver that you used to print the color sampler chart.
Printing the color sampler charts with CentreWare IS
1. Access your printer’s Internet Services home page; refer to page 27 for more
information.
2. Click the Print button to display the Print tab.
3. On the left side of the page, click Print Color Samplers.
4. On the Print Color Samplers page, select the color sampler (either RGB or CMYK) and
click the green button.