3Com Phaser Color Printer 860 - Manual (Page 54)

48 Phaser 860 Color Printer
Troubleshooting Phaser 860 Printers
Maintenance drawer (A) missing
■ If the maintenance drawer is not installed, open the front cover and install the maintenance
drawer (labeled A).
■ If the maintenance drawer is already there, pull out the drawer, make sure that the
counter (orange piece labeled C2) is installed, and re-insert the maintenance drawer.
Maintenance kit low
■ The Maintenance Kit is almost empty.
■ Order a replacement Maintenance Kit since the Maintenance Kit will need replacing
soon.
Maintenance kit empty
■ The Maintenance Kit is depleted. Replace the Maintenance Kit to continue printing.
■ If the message remains after you installed a new kit, make sure that the new counter
(the orange piece labeled C2) was correctly installed.
Maintenance kit service life low
■ The 15-month service life will expire soon.
■ Order a replacement Maintenance Kit since the Maintenance Kit will need replacing
soon.
Maintenance kit service life expired
■ The 15-month service life has expired.
■ Replace the Maintenance Kit now to prevent print quality problems.
Printer error ##
■ An error occurred that may not be user-correctable.
■ Turn off the printer, wait at least 15 seconds, and then turn the printer back on.
■ If the error is not cleared, write down the error number.
■
If you have access to the internet, look up the error number on the infoSMART
web page (see page 44) for possible corrective action.
■
If the error persists, call Customer Support with the error number.