3Com Phaser Color Printer 860 - Manual (Page 41)

Advanced Features and Troubleshooting Manual 35
Printer Management
Front panel language
To change the language used for the text on the front panel:
1. On the front panel, with
Menus
highlighted, press the OK key.
2. Scroll to
Printer Setup Menu
by pressing the Scroll Up or Scroll Down key.
3. Press the OK key.
4. Scroll to
Set Front Panel Language
.
5. Press the OK key.
6. Scroll the desired language.
7. Press the OK key.
Selecting the source for cleaning pages
When one or two High-Capacity Paper Tray Assemblies are installed, the lower tray is the
default source for the cleaning pages that the printer uses in its cleaning procedures. You
can ensure that the printer always uses paper from the lower or middle paper tray in its
self-cleaning procedures by changing a setting in the printer’s front panel:
1. With
Menus
highlighted, press the OK key.
2. Press the Scroll Down key to scroll to the
Printer Setup Menu
.
3. Press the OK key.
4. Scroll to
Set Cleaning Page Source
.
5. Press the OK key.
6. Scroll to the desired tray for the cleaning pages.
7. Press the OK key.
Automatic tray switching
When your printer has one or two high-capacity paper tray assemblies, you can easily run
large jobs without having to replace paper so often. The printer automatically takes paper
from the next tray when the first tray runs out.
■ For automatic tray switching to work properly, load the same type and size paper in
all of the printer’s paper trays.
■ In the printer driver, select Paper as the source, instead of a specific tray.