321 Studios INDUCTION HOBS 7322 230 - Manual (Page 11)

24
The symbol [ U ] displays
 There is no pan on the cooking zone.
 The pan is not compatible with induction.
 The bottom diameter of the pan is too small.
The symbol [ C ] or [ E ] displays
 Call the After-sales Service.
One or all cooking zones cut-off
 The safety system functioned
 You forgot to cut-off the cooking zone for a long time.
 One or more sensitive keys are covered.
 The pan is empty and its bottom overheated.
 The hob also has an automatic reduction of power level and breaking Automatic
overheating
Continuous ventilation after cutting-off the hob
 This is not a failure, the fan continuous to protect the electronic device.
 The fan cooling stops automatically.
MAINTENANCE AND CLEANING
Switch-off the appliance before cleaning.
Do not clean the hob if the glass is too hot: risk of burn.
 Remove light marks with a damp cloth with washing up liquid diluted in a little water.
Then rinse with cold water and dry the surface thoroughly.
 Highly corrosive or abrasive detergents and cleaning equipment likely to cause scratches
must be absolutely avoided.
 Do not ever use any steam-driven or pressure appliance.
 Do not use any object that may scratch the ceramic glass.
 Ensure that the pan is dry and clean. Ensure that there are no grains of dust on your
ceramic hob or on the pan. Sliding rough saucepans will scratch the surface.
 Spillages of sugar, jam, jelly, etc. must be removed immediately. You will thus prevent
the surface being damaged.
ENVIRONMENT PROTECTION
 The packaging material is ecological and can be recycled.
 The worn appliances contain certain noble metals. Apply to the local government about
the possibilities of recycling.
 Don't throw your appliance with the household
refuses
 Get in touch with the waste collection center of
your commune that is adapted to the recycling of
the household appliances.