321 Studios INDUCTION HOBS 7322 230 - Manual (Page 22)

9
Control panel locking
To avoid modifying a setting of cooking zones , in particular with within the framework of
cleaning the control panel can be locked (with exception to the On/Off key [ 0/I ]).
 Locking
Action Control panel Display
Start Press key [ 0/I ] [ 0 ] or [ H ] on displays
Hob locking Press key [ ] [ 0 ] or [ H ] on displays
Locking light is on
 Unlocking
Action Control panel Display
Start Press key [ 0/I ] [ 0 ] on displays
Unlocking the hob Press key [ ] [ 0 ] on displays
Locking light is off
COOKING ADVICES
Pan quality
Adapted materials :
steel, enamelled steel, cast iron, ferromagnetic stainless-steel,
aluminium with ferromagnetic bottom.
Not adapted materials :
aluminium and stainless-steel without ferromagnetic bottom, cupper,
brass, glass, ceramic, porcelain.
The manufacturers specify if their products are compatible induction.
To check if pans are compatibles:
 Put a littler water in a pan placed on an induction heating zone set at level [ 9 ].This water
must heat in a few seconds.
 A magnet stuck on the bottom of the pan.
Some pans can make noise when they are placed on an induction cooking zone. This noise
doesn’t mean any failure on the appliance and doesn’t influence the cooking operating.
Pan dimension
The cooking zones are, until a certain limit, automatically adapted to the diameter of the pan.
However the bottom of this pan must have a minimum of diameter according to the
corresponding cooking zone.
To obtain the best efficiency of your hob, please place the pan well in the center of the cooking
zone.