2Wire 2000 Series - Manual (Page 26)

Appendix A: Install the Gateway on Other Operating Systems
22
USB Connection
Figure 8. Gateway Connected Via USB (Macintosh)
Note: Connecting your computer to the gateway using USB requires an available USB port. Only
one Windows or Macintosh computer can be directly connected to the 2Wire gateway using the
USB connection.
1. Install DSL phone filters according to the instructions on page 2.
2. Insert the 2Wire CD in the computer’s CD-ROM drive.
3. Double-click the 2Wire CD icon on your desktop.
4. Double-click 2Wire USB to begin the driver installation.
5. If you have set up an administrator name and password, the Authenticate screen opens. Enter your
administrator name and password and click
OK .
6. Follow the on-screen instructions. When the driver installation is complete, you will be prompted to
restart your computer.
7. After your computer restarts, connect the provided blue USB cable from the USB-PC port on the 2Wire
gateway to your computer’s USB port.
8. Open the network Control Panel by selecting the Apple icon > Control Panel > TCP/IP .
9. Verify that “Connect Via: 2Wire USB Remote NDIS…” is selected to set the network adapter as active.
10. Click Save to complete your installation.
11. Proceed to “Configuring the Internet Connection” on page 23.