3M MP7730B - Manual (Page 27)

27 3M ™ Personal Projector MP7630B/MP7730B © 3M IPC 2001
3. After leaving the menu system, press the Scan button to scan all existing channels in that region.
✓ Note: Scan function must be done for the first use in certain regions to catch all the channels
in the local CATV system.
Optional Video Module
START SCANNING?
Yes No
After the “START SCANNING?” dialog box prompt, use the Channel Up/Down buttons to select
“Yes” or “No.” Press Return button to set.
Function (Must be performed with remote control unit)
Channel Select Press the channel number button user wants to select (for example, 12), then
press Return button to set.
Channel Up/Down Go up and down through channels by pressing the Channel Up/Down
buttons. The channel number will appear in the lower right corner of the
screen. If there is no further action for three seconds, the channel number
display will disappear automatically.
-123-
Scan Press the Scan button for two seconds to begin scanning TV channels.
Add/Erase Press the Add/Erase button for two seconds to add or erase the channel. To
delete channels from memory, press the button to erase the channel. A
“Channel Erased” message will display. Users can also add channels to
memory by pressing the button after selecting it. A “Channel Added” message
will display.
Reverse Press the Reverse button to toggle between the previous and current channels.
Channel Erased Channel Added